Jura Capresso OEM Complete Brew Group O-ring Gasket Seal Set Kit #5 , No

Jura Capresso OEM Complete Brew Group O-ring Gasket Seal Set COMPLETE SET! What's included: OEM O-rings for  Brew Group. OEM O-rings and Seals for Drainage Valve. OEM High Pressure Hose O-rings OEM Water Tank Seal. The above O-Rings/Seals are new improved direct OEM O-rings/Seals factory replacement that Jura uses. E-Clips - Stainless Steel PLEASE NOTE: Some Pricetronic sellers are offering replacement O-Rings for only the Brew Group. While replacing the Brew Group O-Rings, it is imperative that the Drainage Valve O-Rings and Seals are also replaced at the same time. This set includes O-Rings and Seals for BOTH Brew Group and Drainage Valve. Pictured Set Includes: Brew Group O-Rings:
2x Piston O-Ring: Red (Small O-Ring for lower/small piston, Large O-Ring for Upper/Large Piston)
2x Riser O-Ring: Black or Red Drainage Valve O-Ring/Seals:
2x Groove Ring Seal: Red
1x O-ring Inlet Riser Connection: Small Black High Pressure O-Rings:
10x O-Ring, High Pressure: Red, connecting riser to drainage valve, connecting valve connection, connection high pressure hose and anywhere else in the machine that uses this size of O-Ring.  Usually this O-Ring is used to replace at the high pressure hose and membrane regulator, which is a common leak source. Water Tank Replacement Seal:
1x Seal - Replace the dry/cracked water tank seal with a new seal! E Clips - Stainless Steel 2x E Clips - These clips can break when removing. It's good to have these clips just in case they break. PLEASE NOTE:  This kit does not include the aluminum end cap for the drainage valve assembly. As an alternative, you can do the following long-term fix: Add a small amount (2 drops) of 2-Part Epoxy in both slots of the white end cap. Then, turn the cap two or three times to allow the epoxy to coat the inside the cap. Let dry per epoxy instructions... All done! Suitable for the following machines:
Jura Impressa C Series: C5 - C9- C1000 - C1300 - C1500 - C2000 - C3000 - C50 - C55 - C60 - C65 - C70 - C90
Jura Impressa E Series: E5 - E7 - E8 - E9 - E10 - E20 - E25 - E30 - E40 - E45 - E50 - E55 - E60 - E65 - E70 - E74 - E75 - E80 - E85
Jura Impressa ENA Series: ENA3 - ENA4 - ENA5 - ENA9
Jura Impressa F Series: F5 - F9 - F50 - F55 - F70 - F90 - XF50 - XF70
Jura Impressa J Series: J5 - J6 - J7 - J9 - J9.2 - J9.3 - J9.4
Jura Impressa S Series: S7 - S8 - S9 - S7 Avantgarde - S9 Avantgarde - S9 One Touch - S50 - S55 - S70 - S75 - S85 - S90 - S95
Jura Impressa Z Series: Z5 - Z6 - Z7 - Z9
Jura Impressa X Series: X5 - X7 - X9 - X30 - X70 - X90 - X95 - XS90 - XS95 - XS90 one touch - XS95 one touch
Jura Impressa Cappuccino Maker: Evolution - M30 - Scala - Scala Vario - Ultra - 201 - 300 - 401 - 500 - 601 - 801 - 3000 - 4000 - 5000 - 6000 Please note: No instructions are provided with the Big Deluxe O-Ring/Seal set...  It is assumed the buyer completely knows how to service his/her machine. But, after you purchase this O-Ring set, by request only, we will email links to detailed video instructions for the following: Refurbish Brew Group Instruction Video Refurbish Drainage Valve Assembly Instruction Video